|
|
 |
|
|
 |
|
MT 1
The MT 1 mount is made for the Models 100, 200, 300 and 400 antenna. It's made of 304 stainless steel so it's corrosion resistant and very strong. It comes already assembled with the coax stud. Even the supplied U bolts and nuts are stainless steel. This bracket will bracket up to a 1" industry standard pipe.
$119.00
|
 |
|
LTMT 1
The LTMT 1 mount is made for the Little Tarheel antenna. It's made of 304 stainless steel so it's corrosion resistant and very strong. It comes already assembled with the coax stud. Even the supplied U bolts and nuts are stainless steel. This bracket will bracket up to a 1" industry standard pipe.
$89.00
|
 |
|
Small MT 1
The Small MT 1 mount is made for the Model 75 antenna. It's made of 304 stainless steel so it's corrosion resistant and very strong. It comes already assembled with the coax stud. Even the supplied U bolts and nuts are stainless steel. This bracket will bracket up to a 1" industry standard pipe.
$114.00
|
 |
|
MT 2
The MT 2 mount is made as a support for the MT 1 mount. This mount is also all 304 stainless steel, included with the mount is stainless steel mounting bolts, washers and nuts. This mount comes with extra holes punched in it so it can be mounted to almost anything.
$89.00
|
 |
|
MT 3
The MT 3 mount is made as a support for the MT 1 mount, it's designed for the 2" x 2" receiver. This mount is also 304 stainless steel. The mount comes with an installed anti-rattle kit.
$89.00
|
 |
|
MT 3 FB
The MT 3 FB mount is made as a support for the MT 1 mount, it's designed for the 2" x 2" receiver. This mount is designed to fold back to allow you to open the doors on your SUV or let the tailgate down on your pickup. This mount is also 304 stainless steel. The mount comes with an installed anti-rattle kit.
$144.00
|
 |
|
MT 4 FB
The MT 4 FB mount is made as a support for the MT 1 mount, it's designed for the 1 1/4" x 1 1/4" receiver. This mount is designed to fold back to allow you to open the doors on your SUV or let the tailgate down on your pickup. This mount is also 304 stainless steel. The mount comes with an installed anti-rattle kit.
$144.00
|
 |
|
MT 3 OFB
The MT 3 OFB mount is made as a support for the MT 1 mount, it's designed for the 2" x 2" receiver. This mount is designed to fold back to allow you to open the doors on your SUV or let the tailgate down on your pickup; it is also offset in order for you to get an unobstructed view of that custom license plate. Also, on split door SUVs it lets you open the right door without folding back. This mount is also 304 stainless steel. The mount comes with an installed anti-rattle kit.
$169.00
|
 |
|
MT 5
The MT 5 manual lift & lay mount is made as a support for the MT 1 mount, it's designed to be used in the bed of a truck or any where that you choose to use your antenna in a manner that would require you to lay the antenna down. This mount is also 304 stainless steel.
$149.00
|
 |
|
MT 6
The MT 6 manual lift & lay mount is made as a support for the MT 1 mount, it's designed to be used in the bed of a truck or any where that you choose to use your antenna in a manner that would require you to lay the antenna down. This is a taller version of the MT 5, designed to lay the antenna over the wheel well. This mount is also 304 stainless steel.
$159.00
|
 |
MT 10S
The MT 10S Manual Side Rail Mount for the Model 75 with the short post is made as a support for the Small MT 1 mount, it's designed to be used on the bedrail of a truck in a manner that would allow you to lay the antenna down. This mount is also 304 stainless steel.
$125.00
|
 |
MT 11S
The MT 11S Manual Flat Plate Mount for the Model 75 with the short post is made as a support for the Small MT 1 mount, it's designed to be used on the bedrail of a truck in a manner that would allow you to lay the antenna down. This mount is also 304 stainless steel.
$109.00
|
 |
MT 12
The MT 12 is a 2" Receiver Hitch Mount with a 3' extension to come out from the back side of the vehicle. The MT 1 antenna bracket fits on the pipe for easy installation. This mount is also 304 stainless steel.
$165.00
|
 |
|
Lift & Lay
Motorized Lift & Lay Mount
The Lift & Lay mount is made as a support for the MT-1 antenna bracket, it's designed to give you the option of laying or raising your antenna with the push of a button. You can use this mount on the top of a motor home, camper or bed of a truck. It comes with it's actuator already installed on the mount, the switch to operate and 20 ft. of control cable. This mount is also 304 stainless steel.
$459.00
|
|
|
|
|
